The most compact and efficient
Slim 50 belongs to a new generation of horizontal heat recovery systems: slimmer in size and even more efficient. It can achieve a shower energy efficiency of up to 52%**, which means up to 40%** savings on the hot water energy bill.
Perfectly adaptable to a wide variety of projects, and with great potential for renovations, as it needs less than 100 mm for most configurations.
This product has been awarded for its quality, innovation and efficiency with the Red Dot Award 2024 in the Product Design category.
* KIWA test report: P000320518.
** Considering that 80% of the hot water in the house comes from the bathroom and including the following values for the calculation: a family of 4 persons showering daily, for 8 minutes with a flow rate of 9 L/min. with hot water at 40°C and cold water at 10°C, with our Slim 50 solution. Calculated by Electricity prices for households, June 2024. Energy price data provided by globalpetrolprices.com.
The compact, horizontal solution for recovering heat from shower wastewater
Saves up to 40%** of the hot water energy bill%.
** Considering that 80% of the hot water in the home comes from the bathroom and including the following values for the calculation: a family of 4 people showering daily, for 8 minutes with a flow rate of 9 L/min. with hot water at 40°C and cold at 10°C, with our Slim 50 solution. Calculated by Electricity prices for households, June 2024. Energy price data provided by globalpetrolprices.com.
Recovers up to 52%* of the heat from drained shower water.
* KIWA test report: P000320518.
Caudal de drenaje recomendado entre 5,8 y 12,5 l/min
Why choose Zypho® Slim 50?
Improved energy efficiency
Reduce your energy bill
Fast and safe installation by professionals
Double wall as required by EN 1717
No clogging: full water flow guaranteed
Slim 50: How does it work?
Slim 50 is easy to install, requires no maintenance and is completely invisible.
Its operation is simple: it transfers the heat from the shower waste water (40°) to the cold water inlet (10°).
This preheated water, at 27°, is then directed to the shower faucet, the water heater or, ideally, both.
Configurations for your Slim 50
A. Preheated water is transferred to the tap and boiler. The most efficient configuration
B. Preheated water is transferred only to the faucet.
C. Preheated water is transferred only to the boiler.
Slim 50 versions depending on the type of cold water piping and wastewater connection
Built to last with high quality materials, choose the perfect finish for your project.
The versatility of this model allows you to tackle almost any type of case: find the Slim50 configuration that best suits your project and needs by simply changing the connection to the cold water mains (threaded) and the connection to the drain (glue).
Rosca +
Encolar
All these alternatives are suitable for a wide range of drains:
Shower valve
Bathtub drain
Square drain
Performance and efficiency
Heat is transferred from the waste hot water in the shower to the cold mains supply. This hot water can be directed to the shower faucet, the water heater or both.
See the technical features, performance and efficiency of the Slim 50 in the Technical Catalog.